DialWRXBULLET FLIGHTMy tapes

See the flight.

SAVED SETUPYour saved setup
Your distance

100–2,000 yd, whole numbers. Choose Load flight to apply.

The wind

0–20 mph. Wind speed and direction update in your browser.

Calculating your flight…

Time of flight…
Velocity…
Energy…
Height at target…
Windage vs. sight line…

A look downrange.

Elevation correction: Wind correction:
ACTUAL FLIGHT / AUTO-FIT AXES
Actual flight pathScope line of sight
Interactive three-dimensional bullet flightThe calculated flight with elevation and windage axes in actual inches. Use the camera buttons or arrow keys to change the view.

Elevation and wind are corrected to meet target center.

Load and conditions
Bullet
Atmosphere
Sight height
Drag model / BC
What this view shows

Model note: Spin drift is not included in this simulation.

The path uses your saved load and the same point-mass elevation engine as your tape. Wind is modeled with a first-order uniform-crosswind estimate and an upwind correction. Headwind, changing winds, spin drift, and Coriolis are not modeled here. It does not include the hit-probability tool's group, velocity SD, or wind-error sampling.

The elevation and windage axes fit both flights together. Their proportions are adjusted for visibility and stay the same in every camera view. Side and Overhead rotate the same model; Fit model changes only its overall size. The rulers and top readouts show actual physical inches. The elevation axis includes the launch point below the sight line and both complete paths. The muzzle starts below the sight line by the saved sight height. Grid planes are plotting guides. The endpoint marks the selected distance; there is no target-size illustration.

The saved flight's launch angle returns it to zero elevation at the selected range. A first-order upwind correction cancels its wind drift at that range. The comparison keeps those same corrections while altitude, temperature and humidity change. Muzzle velocity is held constant; ammunition temperature sensitivity is not modeled. Station pressure is derived from altitude. A comparison can miss target center and arrive at a different time. This simulation does not change the saved tape.