Print your dial tonight.
Put distance marks on your elevation dial. Range it, dial to the mark, and use the solution you have verified at the range. No phone or app in the field.
Pick your scope. Enter your load. Print.
The builder shows your tape as you work. Colors, rows, and reference marks update on screen. Download a sample without an email to check fit and style. The sample uses demo marks; the purchased PDF uses your load.
Will it fit your scope?
You need an exposed elevation turret with a smooth, flat band. A coin-slot adjustment under a cap will not take a tape. Knurling, taper, or too little room can prevent a clean wrap.
Measure across the band with calipers, or print the builder's sizing gauge at 100%. Not sure? Email a clear turret photo.
A few numbers to start
Find the exact bullet on the box or maker's data. Add your velocity, confirmed zero, and bore-to-scope sight height. The box velocity is fine to start. Chronograph it later and update your tape free.
Only projectile identity stays locked: ammo, BC, weight, and drag model. Velocity, zero, conditions, and style updates are free and have no deadline. Update frequency may be limited for abuse, service capacity, or operating costs. See the update-frequency policy. Reprints are free forever. Other eligible setup inputs get one correction within 7 days of purchase.
One custom setup. $25.
One rifle, load, and turret configuration. One print-ready PDF with 10 matching cutout tapes. Nothing ships and there is no subscription. Print at 100%, cut, wrap, then verify zero and come-ups with live fire.
Download the two-page introduction (PDF). Keep the full setup guide and printable worksheet for the bench.