Free rifle calculator
Put the odds on paper.
Your load. Your groups. Your wind call. See how they come together at distance with a plot of simulated impacts.
No account, email address, or purchase required.
Start with your rifle and load
Choose your bullet from the builder's catalog or enter its specs. Add measured muzzle velocity, zero, sight height, altitude, temperature, and humidity. The tool starts without a load. Nothing is saved to your account.
Use the groups you actually shoot
Enter your average 10-shot group in inches at 100 yards, measured center to center. A single small group can overstate your precision. The model treats group size as a sample of a wider shot distribution, so some simulated shots can land outside that average group.
Add your chronograph's velocity SD, a 1, 2, or 3 mph crosswind-error SD, and optional range-error SD. An SD describes random variation, not a maximum error. Each simulated impact represents an independent first-shot outcome.
Compare targets and realistic improvements
Try circles, squares, or approximate broadside animal zones. The plot shows 150 sample impacts from 10,000 model draws. A range curve and practical what-if cards show how tighter wind calls, smaller groups, or lower velocity variation change the result.
Calculations cover 100 through at most 1,500 yards. Rimfire and subsonic loads work too. Where a load drops below Mach 1.2, the tool keeps calculating and says so, because real groups can open up more at transonic and subsonic speeds than the model shows.
Know what the model assumes
The model assumes a confirmed zero and a centered mean impact, with independent normal errors. It does not model consistent BC or zero error, animal movement, extra field-position error, changing winds, or terminal performance. Animal drawings and scoring zones are approximate educational assumptions.
For educational use only. These results are not a recommendation to shoot an animal at any specific distance.
Already purchased a tape? Open More tools beside it in your tapes to use its saved ballistics. That menu also includes the bullet flight simulator, drop chart, and hunting reference.
After verifying your load at the range, Build Your Tape. One custom setup is $25.
Browse the free tools or read how the ballistics engine works.